800 iodine value honeycomb activated carbon

Honeycomb activated carbon is made by mixing carbon powder of a certain fineness with additives (binders and lubricants) and then solidifying at high temperature. The additives and solidification have an effect on activated carbon.

Key words:

800 iodine value honeycomb activated carbon

Description

Honeycomb activated carbon is made by mixing carbon powder of a certain fineness with additives (binders and lubricants) and then solidifying at high temperature. The additives and solidification have an effect on activated carbon.
Product performance
Honeycomb activated carbon has good adsorption performance, large geometric surface area, superior kinetic performance and high chemical stability. Honeycomb activated carbon not only contains the original advantages of activated carbon, such as large specific surface area, unique pore structure, stable surface chemical functional groups, resistance to acid and alkali corrosion, hydrophobicity, and regeneration after failure, but also due to its unique honeycomb structure. It has the advantages of high opening rate, uniform gas distribution, larger geometric surface area, short diffusion path, wear resistance, and strong anti-dust pollution ability. Compared with other types of activated carbon, the biggest advantage of honeycomb activated carbon is its low pressure loss.
Applicable industry
Petrochemical, equipment manufacturing, coating, printing and packaging, chemical processing, oil storage and transportation, semiconductor and electronic product manufacturing, pharmaceutical and chemical, pesticide and fertilizer manufacturing, paint and ink production, garbage incineration, hazardous waste incineration, laboratory waste gas treatment .
Parameter index
Product name Honeycomb activated carbon
Product Model TS
Specification 10*10*10cm  10*10*5cm (Aperture 1.5mm 3mm 8mm optional)
Iodine value 400mg/g-800mg/g
Benzene adsorption (static) 20%-50%
Benzene adsorption (dynamic) 15%-45%
Carbon tetrachloride adsorption capacity 25%-65%
Moisture ≤10%
Ash ≤20%
Packing density 0.28 g/ml -0.45g/ml
Package 18 (36) blocks/box; 56 boxes/cube
 
TANSOTM800 iodine value honeycomb activated carbon
TANSOTMThe 800 iodine value new honeycomb activated carbon is a high adsorption performance honeycomb activated carbon developed and produced by Clarkson. This product has a higher iodine value and adsorption performance. The pore size is developed and widely distributed. The specific surface area is higher. It is resistant to medium, high and low concentrations of non-methane total hydrocarbons (NMHC) High removal efficiency, can effectively remove benzene, xylene, acetone, ethanol, hydrogen sulfide, ether, acetic acid, styrene, diformaldehyde, ethane, phosgene, malodor and other multi-component gases. In view of the current problems in waste gas treatment, this product breaks through the adsorption limitation of traditional honeycomb activated carbon, and better solves the problem of short service life.
Performance and advantages
Small wind resistance, convenient desorption (offline/online), easy to fill and replace, perfect strength, high carbon content, super adsorption capacity, larger specific surface area, developed pore size and broad spectrum, strong instant grasping ability, desorption The time is relatively short, the residual rate of VOCs desorption is low, the replacement frequency is low, the service life is long, and the cost of hazardous waste is greatly reduced.
Application field
Petrochemical, equipment manufacturing, coating, printing and packaging, chemical processing, oil storage and transportation, semiconductor and electronic product manufacturing, pharmaceutical and chemical, pesticide and fertilizer manufacturing, paint and ink production, garbage incineration, hazardous waste incineration, laboratory waste gas treatment .
Typical attributes Index
Iodine adsorption value >800mg/g
Moisture content ≤8%
Body density 0.28g/ml-0.32g/ml
Compressive strength 0.9Mpa (positive)   0.3Mpa (side)
Pore size distribution 5nm-35nm
Pore volume 0.7cc/g
Specific surface area 880m2/g
Carbon tetrachloride adsorption rate 50%-65%
Benzene adsorption rate 40%-50%
Ash ≤20%
Working conditions Mth1-3 120℃ Mth>4 90-100℃
Relative humidity 99%(When there is no condensation)
Recommended wind speed 0.8m/s
Primary efficiency Level 3 or above
Avoid direct ingredients Inorganic substances such as esters and hydrocarbons
Regular size 100*100*100mm 1.5mm Aperture
 
VOCs Treatment of honeycomb activated carbon
  TANSOTMThe series of honeycomb activated carbon products meet the adsorption and purification of low, medium and high concentration exhaust gas. The products have high adsorption performance, large specific surface area and uniform pore size distribution. It has a good adsorption effect for benzene, xylene, acetone, hydrogen sulfide, ether, acetic acid, styrene, diformaldehyde, ethane, phosgene, malodor and other organic volatiles in industrial production.
Application field
Petrochemical, equipment manufacturing, coating, printing and packaging, chemical processing, oil storage and transportation, semiconductor and electronic product manufacturing, pharmaceutical and chemical, pesticide and fertilizer manufacturing, paint and ink production, garbage incineration, hazardous waste incineration, laboratory waste gas treatment .
Product specifications TS-UW TS-WP
Iodine adsorption value 400-800mg/g 400-800mg/g
Specification 10*10*10cm 10*10*5cm (Aperture 1.5mm 3mm 8mm optional)
Water resistance Not waterproof Water proof
Carbon tetrachloride adsorption rate 25%-65%
Benzene adsorption rate (static) 20%-50%
Benzene adsorption rate (dynamic) 15%-45%
Moisture ≤15% ≤10%
Ash ≤20%
Strength 0.9Mpa (positive) 0.3Mpa (side)
Recommended wind speed 0.8m/s
Packing density 0.32-0.5g/ml 0.28-0.45g/ml
Wind resistance 490Pa(Wind speed 0.8m/s, bed thickness 60cm)
 
Air purification activated carbon
Activated carbon adsorption method for indoor pollutant treatment is mainly for chemical pollutants, such as formaldehyde pollution, benzene and homologous pollution, ammonia pollution, nitrogen oxide pollution, carbon oxide pollution, cooking oil fume pollution and radon pollution. As the most commonly used adsorbent, activated carbon has a microporous structure that can purify the air more thoroughly and long-term to achieve the purpose of treatment.
Product specifications TS-IC
Specification Shaped Custom
Iodine adsorption value >600mg/g
Pore size distribution 5nm-35nm
Specific surface area >700 m2/g
Applicable equipment Fresh air system, air purifier
Applicable field Homes, hospitals, schools and public places

 

Related products

Welcome your message consultation